Here are some maintenance tips for the various items you find here:
- For 3D boards, the easiest way to remove dust is to use a brush, dry. This will allow you to remove dust with no risk of hanging the dust cloth.
If the wood is oiled or waxed, you will need to renew the operation approximately once a year. With a soft cloth, without overloading, you will apply the finish. Do not forget to wipe off the surplus to avoid having a sticky layer.
if there is anthracite gray wax on it, ditto, you will renew the operation once a year.
Apply a thin coat, allow to dry (as indicated on the box) and then wipe off the excess.